High-efficiency vibrators for spreaders, pumpers and volumetric mixer trucks

Martin Engineering
November 15, 2017
By Martin Engineering
November 15, 2017 –  A global leader in bulk handling technology has introduced a 12 VDC electric vibrator that combines superior performance with long-lasting reliability to improve material flow in specialized hauling and distribution vehicles.  Cougar MDC12-400/700 vibrators from Martin Engineering offer powerful bulk material movement for concrete pump trucks, salt/sand/gravel/fertilizer spreader trucks and volumetric mixer trucks. Able to be retrofitted to most standard brackets, the high-efficiency design uses less current and runs at a lower temperature, while retaining the same power as comparable models. The result is longer equipment life with lower operating expense and maintenance costs by reducing material buildup, slow unloading, clogging and bridging.

“Slow discharge or blockage occurs for several reasons - humidity, material consistency, etc., but out in the field, the most aggravating reason is when vibration equipment fails,” said Allen Twidell, mobile market manager for vibration at Martin Engineering. “When that happens, everything stops and operators need to take steps to manually dislodge material using shovels or rods to poke at the clog, or mallets to bang on the side of equipment.  These actions can result in equipment damage or sudden discharge, which can be dangerous.  The extra time and labor also raises operating costs and reduces productivity.”

Powered by a high efficiency 12-volt DC motor with a maximum draw of 13 amps, the oversized permanent magnet design of the MDC12 Vibrators reduces demand on the vehicle’s electrical system. Drip-impregnated armature windings carry the current, and sealed, oversized bearings eliminate lubrication requirements, keep contaminants out and ensure ongoing performance with minimal maintenance. A more sustainable operating temperature coupled with high-temperature Class F insulation puts less stress on internal components, leading to better efficiency and greater durability.

Delivering a centrifugal force output of 400 lbf (90 N) for the pumper/spreader model or 700 lbf (160 N) for larger spreader applications, the internal components are housed in a heavy-duty aluminum alloy case. Weighing only 18 lbs (8 kg), the unit features a more compact design than comparable vibrators on the market. To eliminate moisture penetration, Martin Engineering designers placed the terminal box underneath the vibrator to better secure the electrical wiring, then filled the box with silicone rubber for added protection against moisture and other contaminants.

Featuring machined surfaces and sealed with O-rings to create dust-tight and water-tight protection, the vibrator carries an IP-66 rating, ensuring that it can withstand punishing winter and summer environments. The external surfaces are smoothed and painted to eliminate buildup of fugitive material.

Designed and manufactured in America, the MDC12-400/700 is intended to replace less reliable, foreign-made models at a competitive cost to the customer. Able to fit most existing brackets, the unit has a specially designed mounting base with three holes on each of the four legs, which permits selection of four different mounting patterns. With a 10 in. (254 mm) pigtail cord ending in a two-prong plug, the unit fits most truck electrical systems.

“Even before this vibrator went into full production, it was adopted by a specialty snow removal equipment manufacturer as their standard unit for the hoppers of their salt spreaders,” Twidell pointed out. “With the more efficient compact design and Martin’s performance guarantee, this vibrator has received a positive reception from the industry for its superior construction and lower cost of ownership.”

One of the first 12 volt DC truck vibrators for these applications was a Cougar branded model that was patented in 1964.  Martin Engineering - the world’s largest supplier of industrial vibrators - acquired Cougar Vibration in 2010 and has been one of the vibration industry’s most prolific innovators since the company’s inception in 1944.

Martin Engineering is a global innovator in the bulk material handling industry, developing new solutions to common problems and participating in industry organizations to improve safety and productivity. The company’s series of Foundations books is an internationally-recognized resource for safety, maintenance and operations training - with an estimated 10,000 copies in circulation around the world - and employees take an active part in ASME, SME, VDI, CMA and CEMA. The firm also played a pivotal role in writing and producing the 7th edition of the CEMA reference book, Belt Conveyors for Bulk Materials. Martin Engineering products, sales, service and training are available from factory-owned business units in Australia, Brazil, China, France, Germany, India, Indonesia, Italy, Mexico, Peru, Russia, Spain, South Africa, Turkey and the U.K. For more information, visit www.martin-eng.com.

Add comment


Security code
Refresh

Subscription Centre

 
New Subscription
 
Already a Subscriber
 
Customer Service
 
View Digital Magazine Renew

Most Popular

Latest Events

ASGA 2018 Conference & AGM
January 10-11, 2018
74th Congress of the ACRGTQ
January 17-19, 2018
World of Concrete
January 23-26, 2018